TechPulley sliding rolls in the 17/18x12mm format, weight 10 grams, 6 pieces / package.
Attention: For TechPulley Sliding rolls we recommend the weight around 5-10% below the weight of the original rolls.
TechPulley rolls produce a much better acceleration performance than regular roller weights. They are precisely manufactured from a special nylon material that is characterized by particularly good sliding on aluminum (the material of the Vario). The abrasion is much less and the dreaded one-sided flattening of standard roles are not possible. Unlike normal vario rolls TechPulley rollers have a much longer life.
New to the three "wings" of the TechPulley FR roll. The large central wing causes the roll to develop more pressure against the cam-plate, but it also prevents from rattling inside the vario.
The two small wings on the side not only facilitate the correct insertion of the sliding roller in the correct position, but also prevent the tilting of the roller. If these occasionally interfere with them or in special Varios, they can be cut off without hesitation.
TechPulley recommends that you choose the weight of the FR sliding rolls 5%below the original rolls or (if you are heavy and/or like to drive mountain roads) 5-10% below the weight of the original rolls in the original variator. Then a significant powerful acceleration results in an almost unchanged or even better top speed with same fuel consumption. If the weight is chosen equal to he original weight, the acceleration is slightly stronger, but may slightly increase the maximum speed for the same or even slightly reduced consumption.
Fits the following scooter / motor models:
Suzuki AN 125
TechPulley sliding pieces SP08/SP2012-E
Dr.Pulley sliding pieces SP1712-B
TechPulley sliding pieces SP09/SP1613-G
This Product was added to our catalogue on 18/08/2020.